TP318 Tumbler Wraps & Transfers

THIS IS A PHYSICAL PRINTED PRODUCT 

Our Sublimation Wraps are printed on a wide format Epson sublimation printer with Epson premium ink and paper.

Our Vinyl Wraps are printed on a wide format Roland Eco Solvent Printer with Roland Calendared Permanent Vinyl (Glossy, Matte & Clear) and Holographic Permanent Vinyl

These designs are sized for our 20oz and 30oz tumblers. Vinyl wraps are typically used with Epoxy Resin but can also last a long time if laminated before applied or by applying Transparent Oracal 651

Sizing

*The sizing fits Kawartha Vinyl tumblers if you measure and you need a different size please let us know and we can adjust for you* 

20oz tumblers 9.2x8.3"

30oz tumblers 9.93”x9.375"

General pressing instructions for SUBLIMATION WRAPS

Press: 356 degrees for 1 minute if not a full wrap 

for a full wrap: 356 degrees for 45 seconds rotate 180 degrees and press for 45 seconds 

Time and temp for Oven: 385 degrees for 5 minutes rotate at 2.5 minutes 

These are recommendations only, you may need to adjust time and temp to get optimal results with your press.